未成满18禁止免费网站

  1. <code id="zazf4"><em id="zazf4"><track id="zazf4"></track></em></code>
    <code id="zazf4"></code>
    <th id="zazf4"></th>
    1. Product

      Product

      65圖.jpg 


      JXHIN-65

      Pump size:DN65 Flange,Max flow:32200 l/h


      standard:5.5kw Variable frequency motor


      Suction ability up to 9.5   meters and self-priming
      Dry-run   without damage
      For   high viscosity or shear sensitive medium
      No   leaking, no block. No sealing gasket, ball, diaphragm, immersion rotor,   stator and piston etc.
      Pumping   abrasive slurries, corrosive acids, large solids       and gas-liquid mixture.
      No   internal leakage. Flow stability, can accurate and repeatable measurement.   Accuracy ±1%
      No   ancillary equipment, check valves or water flush systems
      Reversing   operation, particle can safety out from suction or discharge pipe
      ◆Minimal   maintenance-just change the hose
      ◆Reliable quality, low using cost


      Flow  rate measured with water of 20℃, out   pressure show as following chart

      JX65參數.jpg


      Product   information

      Inlet/outlet

      DN65 FLANGE


      Motor power

      5.5KW


      Max flow

      6.7 l/min


      Max head

      160m


      Max discharge pressure

      16 Bar


      Lubricant required

      25 L


      Max temperature

      80


      Hose options

      Chlorosulfonated polyethylene rubber(CSM) Natural   rubber(NR)
        foodgrade hose(F NBR)  nitrile   rubber(NBR)  EPDM


      Installation   size (mm)

      65尺寸圖加水印.jpg